Tower-Mounted Ground Surveillance Radar

PGSR-3iFT

Tuesday, 04 September 2018 13:43

Vehicle Mounted Ground Surveillance System

MGS3 ‘Scout’

VEHICLE MOUNTED GROUND SURVEILLANCE SYSTEM

MGS3 Scout

The MGS3 ‘Scout’ Vehicle is a mobile surveillance unit offering a unique cost-efficient defense solution providing an increased capability of early threat recognition and improved perimeter control.

BENEFITS

check

Vehicle mounted multisensor system

check

Common user interface with multiple display units

check

Easy to deploy / pack

check

Long time surveillance scenarios

check

Cost efficient

check

Covert surveillance equipment

WIDE RANGE OF USAGE

MGS3 ‘Scout’ is designed for long range security patrols, for controlling large areas and defending mobile targets, and for situations where security demands a perpetual adaptation of reconnaissance patterns. The operators of an MGS3 ’Scout’ will be able to quickly redefine the boundaries of the controlled area to instantly react to any situation that may arise.

OVERVIEW

The MGS3 ’Scout’ is a vehicle equipped with a number of surveillance modules, a PGSR-3i ‘Beagle’ radar unit, an electro optical sensor array and a Command Center.
The PGSR-3i ‘Beagle’ provides continuous observation of a large area detecting any movements, while the electro optical sensor array provides detailed picture of any detected targets for accurate identification useable in both day and night operation.
The electro optical head and the radar are mounted on retractable masts. The vehicle is assembled with a leveling system in order to stabilize and level the sensors. The high capacity battery system provides enough power for long time surveillance scenarios, but the working hours can be extended by a backup generator.The operating platform, Pro Patria Electronics’ unique Adaptive Multisensor System, presents an easy to operate user interface, offering the possibility of multi-tasking and educated decision-making to the operator. The software is capable of utilizing different map formats and displaying the detected targets over the map. The video of the cameras and the control functions are also integrated into the same system proving even automatic slew-to-cue functions. Every surveillance data and user interaction is recorded and can be replayed for further analysis.

TECHNICAL PARAMETERS

GENERAL HARDWARE SETUP AND CHARACTERISTICS
Instrumentation
Vehicle options
Power supply
 
PGSR-3i ’Beagle’ radar unit
Electro-Optical Sensor Array (EOSA)
Masts
Leveling system
Command center
Other instruments as needed
Any vehicle as needed
Vehicle-built-in battery set (24V DC) for 4-8 hours battery operation
Power generator and charger (230V AC)

PGSR-3i ‘Beagle‘
Detection Ranges
Scanning Modes
Scan Rate
Accuracy
Detectable Radial Velocity
Target Capacity
Other Features
Environmental Specifications
 
Pedestrian | (RCS 0.5 m²) | 8 km
Soldier | (RCS 1 m²) | 10 km
Vehicle | (RCS 10 m²) | 15 km
Large vehicle | (RCS 50 m²) | 24 km
Sector Scan (6° – 346°)
Continuous Rotation (n x 360°)
7°/sec or 14°/sec
Range: 3 m at 3 km range
Azimuth: < 0.3°
from 1.0 km/h at 7°/sec scan rate
from 1.7 km/h at 14°/sec scan rate
10 plots / sec
Track While Scan, Clutter map, Spot Window, Doppler Audio, Automatic Classification, LPI, STC, CFAR
Tested according to MIL-STD-810G

EOSA 225 (Option A)
Thermal Imager
Thermal Engine
Spectral Band
NETD
Lens F#
Focal Length
Field of View
Daylight Camera
Effective Pixels
Focal Length
Field of View
Pan and Tilt
Pan Range
Tilt Range
Position Accuracy
Pan/Tilt angular speed
Environmental Specifications
 

17μm 640 x 480 pixels
7.5 – 14μm (Uncooled)
lower than 50° mK
f / 1.5
25 – 225 mm (Continuous)
24.5° to 2.77°

752 x 582 pixels
10 – 320 mm (Continuous)
35.3° to 1.1°

360 Continuous
± 45°
± 1.5 mRad
0.1°/s to 50°/s
MIL-STD-810G

EOSA 275 (Option B)
Thermal Imager
Thermal Engine
Spectral Band
NETD
Lens F#
Focal Length
Field of View
Daylight Camera
Effective Pixels
Focal Length
Field of View
Pan and Tilt
Pan Range
Tilt Range
Position Accuracy
Pan/Tilt angular speed
Environmental Specifications
 

15μm 640 x 512 pixels
3 – 5μm(Cooled)
lower than 25° mK
f / 5.5
19 – 275 mm (Continuous)
29.8° to 2.0°

752 x 582 pixels
10 – 320 mm (Continuous)
35.3° to 1.1°

360 Continuous
± 45°
± 1.5 mRad
0.1°/s to 50°/s
MIL-STD-810G

SPECIAL FEATURES
-Display and Control sensors from one user interface
-Support of multiple monitors and split screens
-Record and replay of all displayed data
-Automatic optical target follow
-Periodic polling of optical marker points

Tuesday, 04 September 2018 13:43

Mid-Range Multi-Sensor System

PMS2 ‘Sentinel’

MID-RANGE MULTI-SENSOR SYSTEM

PMS2 Sentinel

The PMS2 ‘Sentinel’ is offering a lightweight, cost-efficient and easy to deploy solution optimized for silent battery operation with long runtime. The system provides a very good Return of Investment solution for the user.


BENEFITS

check

Man-portable multi-sensor system

check

‘Slew to Cue’
functionality

check

Long time surveillance scenarios

check

Quick deployment

check

Rugged design

check

Cost-efficient solution

OVERVIEW

The system integrates two surveillance sensors, a PGSR-3i ‘Beagle’ Radar unit and an Electro-Optical Sensor Array.
The PGSR-3i ‘Beagle’ provides continuous observation of a large area detecting any movements, while the Electro-Optical Sensor Array provides detailed image of any detected targets for accurate identification useable in both day and night operation. The Electro-Optical Sensor and the Radar are mounted on their individual tripods and connected to the Operator Unit via cables and interface boxes. The standard military batteries provide enough power for 8 hours surveillance scenarios, but the independent operating time can be extended with extra battery sets or vehicle generator/battery.

The operating platform is the Pro Patria Electronics Ltd developed ADAMS (ADAptive Multisensor System), and provides an easy-to-operate user interface, offering the possibility of multi-tasking and educated decision-taking for the operator. The software is capable of utilizing different map formats and displaying the detected targets over the map. The video of the cameras and the control functions are also integrated into the same system proving automatic Slew to Cue functions. Surveillance data and user interaction is recorded and can be replayed for further/later analysis.

TECHNICAL PARAMETERS

GENERAL HARDWARE SETUP AND CHARACTERISTICS
Instrumentation
Power Requirements
 
PGSR-3i ’Beagle’ radar unit
Electro-Optical Sensor Array (EOSA)
PGSR-3i ‘Beagle’:
22 - 33 VDC, max. 60 W
Thermal Camera option A:
18 - 28 VDC, 30 W typical, max. 350 W
Thermal Camera option B:
24 VDC, 30 W typical, max. 390 W

PGSR-3i ‘Beagle‘
Detection Ranges
Scanning Modes
Scan Rate
Accuracy
Detectable Radial Velocity
Target Capacity
Other Features
Environmental Specifications
 
Pedestrian | (RCS 0.5 m²) | 8 km
Soldier | (RCS 1 m²) | 10 km
Vehicle | (RCS 10 m²) | 15 km
Large vehicle | (RCS 50 m²) | 24 km
Sector Scan (6° – 345°)
Continuous Rotation (n x 360°)
7°/sec or 14°/sec
Range: 3 m at 3 km range
Azimuth: < 0.3°
from 1.0 km/h at 7°/sec scan rate
from 1.7 km/h at 14°/sec scan rate
10 plots / sec
Track While Scan, Clutter map, Spot Window, Doppler Audio, Automatic Classification, LPI, STC, CFAR
Tested according to MIL-STD-810G

EOSA 225 (Option A)
Thermal Imager
Thermal Engine
Spectral Band
NETD
Lens F#
Focal Length
Field of View
Daylight Camera
Effective Pixels
Focal Length
Field of View
Pan and Tilt
Pan Range
Tilt Range
Position Accuracy
Pan/Tilt angular speed
Environmental Specifications
 

17μm 640 x 480 pixels
7.5 – 14μm (Uncooled)
lower than 50° mK
f / 1.5
25 – 225 mm (Continuous)
24.5° to 2.77°

752 x 582 pixels
10 – 320 mm (Continuous)
35.3° to 1.1°

360 Continuous
± 45°
± 1.5 mRad
0.1°/s to 50°/s
MIL-STD-810G

EOSA 275 (Option B)
Thermal Imager
Thermal Engine
Spectral Band
NETD
Lens F#
Focal Length
Field of View
Daylight Camera
Effective Pixels
Focal Length
Field of View
Pan and Tilt
Pan Range
Tilt Range
Position Accuracy
Pan/Tilt angular speed
Environmental Specifications
 

15μm 640 x 512 pixels
3 – 5μm(Cooled)
lower than 25° mK
f / 5.5
19 – 275 mm (Continuous)
29.8° to 2.0°

752 x 582 pixels
10 – 320 mm (Continuous)
35.3° to 1.1°

360 Continuous
± 45°
± 1.5 mRad
0.1°/s to 50°/s
MIL-STD-810G

SPECIAL FEATURES
-Display and Control sensors from one user interface
-Support of multiple monitors and split screens
-Record and replay of all displayed data
-Automatic optical target follow
-Periodic polling of optical marker points
EOSA Type and manufacture to be tailor-made to customer’s needs, typical long range configurations are above.

IMAGE GALLERY

Tuesday, 04 September 2018 13:41

Electro Optical Surveillance System - EOSA 225

EOSA 225

ELECTRO OPTICAL SURVEILLANCE SYSTEM

EOSA 225

EOSA 225 is a market-leading mid-range dual-sensor surveillance system. This unique system combines an advanced high-resolution uncooled thermal continuous zoom camera with a mid-range visible-light camera on an accurate pan-tilt unit. The EOSA 225 offers mid-range detection and assessment without requiring regular maintenance, ensuring low cost of ownership. Typical applications for this system include airports and other sensitive installations.

This camera was integrated with PPE ADAMS Sensor Management System and developed to work with PGSR-3i Beagle radars.

BENEFITS

check

Dual Continuous Zoom Channels (Thermal & Color)
Independent continuous zoom thermal and color cameras provide maximum situational awareness, user friendliness, and 24/7 threat assessment.

check

Mid-Range Thermal Imagers
Uncooled thermal cameras provide long range performance with no routine preventive maintenance.

check

Ruggedized for Harsh Environments
A rugged design, certified to IP66, and protected against hot, cold, dusty, and other harsh or industrial environments.

check

Easy Integration
Serial or TCP/IP configurations. Pelco D and ONVIF Profile S Compliant (TCP/IP only).

AVAILABLE CONFIGURATIONS


Thermal Imager:

17μ: 640 x 480 (NTSC/PAL).

Visible Imager

1/2” color CCD camera.

Visible Optic Features:

- Image Stabilization
- Infrared Cutfilter Removal.

Additional Options

Thermal Image Stabilization.

Thermal Optics:

Continuous Zoom 25-225mm.

Visible Optics:

Continuous Zoom 10 - 320mm.

Video Streaming (TCP/IP):

Multiple, configurable streams in H.264 and MJPEG

Analog or TCP/IP


EOSA 225 CAMERA PERFORMANCE

EOSA225

EOSA 225 SPECIFICATIONS

EOSA 225
 
Imager Type
Resolution
Sensitivity
Video Output
Imager Features
Continuous Zoom Lenses
 
Uncooled Thermal
Uncooled 17µ Microbolometer 7.5-14µ
17µ: 640 x 480
NETD: < 50° mK
RS-170 (30Hz) / CCIR (25Hz)
Motorized Focus, Autofocus on Demand, Polarity, NUC, Image flip, Manual gain/level, Optical & Digital Zoom
25 - 225mm: 24.5° - 2.8° HFOV
 
Visible
1/2” Color CCD
768 x 494
>50dB S/N
NTSC (30Hz) / PAL (25Hz)
12x Digital Zoom & Autofocus
10 - 320mm (32x): 35.3° - 1.1° HFOV (1/2”)

System Specifications
Unit Dimensions
Unit Weight
Environmental Rating
Certifications
Power Input
Power Consumption
Operating Temperature
Communication Protocol
Control Connection
Accuracy
Pan Range
Tilt Range
Pan Speed
 
Dependent on configuration - see system specifications
Dependent on configuration - see system specifications
IP66
CE, FCC
18 - 28V DC
30w typical; 350w max
-40° to +60° C (-40° to + 140° F )
Pelco D, Vumii, ONVIF Profile S (TCP/IP)
Serial: RS422/RS485 or TCP/IP
+/- 1.5 mRad
360° Continuous
-90° to +90°
Variable Speed, 0.1° - 50°/sec

*Nominal values may change depending on configuration. Comment: Detection ranges have been determined without taking into account the atmospheric conditions.

IMAGE GALLERY

Published in Electro optic
  • Könyves Kálmán krt. 12-14
    BUDAPEST, H-1094
    HUNGARY
  • +36 1 322 7010
  • This email address is being protected from spambots. You need JavaScript enabled to view it.