Mid-Range Multi-Sensor System

PMS2 ‘Sentinel’

Tuesday, 04 September 2018 13:43

PMS2 ‘Sentinel’

MID-RANGE MULTI-SENSOR SYSTEM

PMS2 Sentinel

The PMS2 ‘Sentinel’ is offering a lightweight, cost-efficient and easy to deploy solution optimized for silent battery operation with long runtime. The system provides a very good Return of Investment solution for the user.


BENEFITS

check

Man-portable multi-sensor system

check

‘Slew to Cue’
functionality

check

Long time surveillance scenarios

check

Quick deployment

check

Rugged design

check

Cost-efficient solution

OVERVIEW

The system integrates two surveillance sensors, a PGSR-3i ‘Beagle’ Radar unit and an Electro-Optical Sensor Array.
The PGSR-3i ‘Beagle’ provides continuous observation of a large area detecting any movements, while the Electro-Optical Sensor Array provides detailed image of any detected targets for accurate identification useable in both day and night operation. The Electro-Optical Sensor and the Radar are mounted on their individual tripods and connected to the Operator Unit via cables and interface boxes. The standard military batteries provide enough power for 8 hours surveillance scenarios, but the independent operating time can be extended with extra battery sets or vehicle generator/battery.

The operating platform is the Pro Patria Electronics Ltd developed ADAMS (ADAptive Multisensor System), and provides an easy-to-operate user interface, offering the possibility of multi-tasking and educated decision-taking for the operator. The software is capable of utilizing different map formats and displaying the detected targets over the map. The video of the cameras and the control functions are also integrated into the same system proving automatic Slew to Cue functions. Surveillance data and user interaction is recorded and can be replayed for further/later analysis.

TECHNICAL PARAMETERS

GENERAL HARDWARE SETUP AND CHARACTERISTICS
Instrumentation
Power Requirements
 
PGSR-3i ’Beagle’ Radar System EOSA Electro-Optical Camera System
PGSR-3i ‘Beagle’ Radar System:
Operating voltage: 22 - 32 VDC, max. 60 W
EOSA Electro-Optical Camera
System: Operating voltage: 20 - 32 VDC,
36 W typical, max. 240 W@ 50msec

PGSR-3i ‘Beagle‘
Detection Ranges
Scanning Modes
Scan Rate
Accuracy
Detectable Radial Velocity
Target Capacity
Other Features
Environmental Specifications
 
Pedestrian | (RCS 0.5 m²) | 8 km
Soldier | (RCS 1 m²) | 10 km
Vehicle | (RCS 10 m²) | 15 km
Large vehicle | (RCS 50 m²) | 24 km
Sector Scan (6° – 345°)
Continuous Rotation (n x 360°)
7°/sec or 14°/sec
Range: 3 m at 3 km range
Azimuth: < 0.3°
from 1.0 km/h at 7°/sec scan rate
from 1.7 km/h at 14°/sec scan rate
10 plots / sec
Track While Scan, Clutter map, Spot Window, Doppler Audio, Automatic Classification, LPI, STC, CFAR
Tested according to MIL-STD-810G

EOSA ELECTRO OPTICAL CAMERA SYSTEM
Thermal Camera
Type
Resolution
Pixel Size
Lens
HFOV
NETD
Daylight Camera
Type
Lens
Resolution
FOV
Optical Zoom
Ranges*
Pan and Tilt Unit
Overage Angle
Elevation
Pan Speed
Tilt Speed
System Specification
Video Output
Communication
Power
Weight
Operating temperature
Environmental
compliance
 

Uncooled Micro bolometer
640x480
17μ
25 - 225mm Continuous Zoom
WFOV 24.6° / NFOV 2.8°
72mK@F1.5, 30Hz

CMOS
25 - 880mm
1920 x 1080, Full HD 1080p
WFOV: 19° / NFOV: 0.35° (±10%)
X54

Human detection: 3.6 km
Vehicle detection: 6.5 km
Human recognition: 1.8 km
Vehicle recognition: 3.4 km
Human identification: 0.9 km
Vehicle identification: 1.7 km

n x 360° Continuous Rotation
+45° to -60°
Up to 45°/sec
Up to 8°/sec

PAL/NTSC or Digital
RS-422 or LAN
12 - 24 VDC
<50 Kg
-20°C to +55°C
IP67 designed to meet
MIL-STD-461E & MIL-STD-810F

*Calculated range performance of Thermal camera Human Object dimensions: 1.7x0.5m NATO Target dimensions: 2.3x2.3m Atmospheric visibility > 23Km Atmospheric Transmittance > 0.82/Km

SPECIAL FEATURES
Display and Control sensors from one user interface
Support of multiple monitors and split screens
Record and replay of all displayed data
Automatic optical target follow
Periodic polling of optical marker points

EOSA Type and manufacture to be tailor-made to customer’s needs, typical long range configurations are above.
© 2019 Pro Patria Electronics. All rights reserved. This document may not be copied in any form without permission from Pro Patria Electronics. Information in this document is subject to change without notice. PMS 2 ‘Sentinel’ and PGSR-3i ‘Beagle’ are trademarks of Pro Patria Electronics. All other trade and service marks are the property of their respective holders.

IMAGE GALLERY

Read 2375 times Last modified on Monday, 25 November 2019 17:54
  • Könyves Kálmán krt. 12-14
    BUDAPEST, H-1094
    HUNGARY
  • +36 1 322 7010
  • This email address is being protected from spambots. You need JavaScript enabled to view it.